Error with DPARSF

Submitted by ShengChe on

Dear all, 

I got the following error messages when I run the DPARSF advanced mode.

I am using SPM12 and Matlab 2014b.

Could someone help me for this?

Thank you!

Alex

-------

Error using DPARSFA_run>(parfor body) (line 571)
Index exceeds matrix dimensions.
 
Error in DPARSFA_run (line 546)
        parfor i=1:AutoDataProcessParameter.SubjectNum
 
 
Error in DPARSFA>pushbuttonRun_Callback (line 1761)
    [Error]=DPARSFA_run(handles.Cfg);
 
 
Error in gui_mainfcn (line 95)
        feval(varargin{:});
 
Error in DPARSFA (line 30)
    gui_mainfcn(gui_State, varargin{:});
 
 
Error using drawnow
Error while evaluating UIControl Callback

YAN Chao-Gan

Mon, 02/15/2016 - 02:27

Permalink

Hi Alex,

Please make sure all the subjects have the correct number of time points in FunImg.

Best,

Chao-Gan

Dear Chao-Gan,

Thank you. I found my error.

However, when I continued, there were some new error messages.

 

---

Error using DPARSFA_run>(parfor body) (line 4722)
/bin/mv: Argument list too long.
 
Error in DPARSFA_run (line 4719)
        parfor iMeasure=1:length(MeasureSet)
 
 
Error in DPARSFA>pushbuttonRun_Callback (line 1761)
    [Error]=DPARSFA_run(handles.Cfg);
 
 
Error in gui_mainfcn (line 95)
        feval(varargin{:});
 
Error in DPARSFA (line 30)
    gui_mainfcn(gui_State, varargin{:});
 
 
Error while evaluating UIControl Callback
---
 
Was the long path of the working folder too long?
 
Thanks a lot!
Alex

Dear Chao-Gan, 

Only 200 time points for that subject.

I tried again using another subject and still encountered the same error.

This error happened after moving the degree of centrality.

Best,

Alex

-----

Moving Smoothed Files:ReHo_FunImgARCWDF OK
Moving Smoothed Files:DegreeCentrality_FunImgARCWDF OKMoving Smoothed Files:ALFF_FunImgARCWD OKMoving Smoothed Files:VMHC_FunImgARCWDFsymS OKMoving Smoothed Files:fALFF_FunImgARCWD OK
Error using DPARSFA_run>(parfor body) (line 4722)
/bin/mv: Argument list too long.
 
Error in DPARSFA_run (line 4719)
        parfor iMeasure=1:length(MeasureSet)
 
 
Error in DPARSFA>pushbuttonRun_Callback (line 1761)
    [Error]=DPARSFA_run(handles.Cfg);
 
 
Error in gui_mainfcn (line 95)
        feval(varargin{:});
 
Error in DPARSFA (line 30)
    gui_mainfcn(gui_State, varargin{:});
 
 
Error using drawnow
Error while evaluating UIControl Callback
-----

 

Hi Chao-Gan,
I have checked the folder.
In the folder of 'Results\fALFF_FunImgARCW\", it has fALFFMAP, mfALFFMap, zfALFFMap of all subjects.
In the folder of 'ResultsS\fALFF_FunImgARCW\", it has sfALFFMAP, smfALFF, szfALFFMap of all subjects.

The folder after fALFF_FunImgARCW is FC_FunImgARCWF, which contains 75,300 files of 1568 ROIs.

Is this problem due to I didn't give predefined ROIs?

Sheng-Che

2016-02-16 19:20 GMT-05:00 The R-fMRI Network <rfmri.org@gmail.com>:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by YAN Chao-Gan (YAN Chao-Gan)
Hi,
Could you check what do you have under "fALFF_FunImgARCWD".

But even I unchecked the options of "functional connectivity" and "Extract ROI time courses", there were still some other error messages.
----
Computing VMHC...
Reading images from "/Users/schung/analysis/Disconnection/FunImgARCFWsymS/sub40_pre/ssym_wFiltered_4DVolume.nii" etc.
Error using y_VMHC (line 75)
To RESHAPE the number of elements must not change.

Error in DPARSFA_run>(parfor body) (line 4327)
            [VMHCBrain, Header] =
            y_VMHC([AutoDataProcessParameter.DataProcessDir,filesep,FunSessionPrefixSet{iFunSession},AutoDataProcessParameter.StartingDirName,filesep,AutoDataProcessParameter.SubjectID{i}],
            ...


Error in DPARSFA_run (line 4324)
        parfor i=1:AutoDataProcessParameter.SubjectNum


Error in DPARSFA>pushbuttonRun_Callback (line 1761)
    [Error]=DPARSFA_run(handles.Cfg);


Error in gui_mainfcn (line 95)
        feval(varargin{:});

Error in DPARSFA (line 30)
    gui_mainfcn(gui_State, varargin{:});

 
Error while evaluating UIControl Callback
----


2016-03-03 15:40 GMT-05:00 The R-fMRI Network <rfmri.org@gmail.com>:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by Sheng-Che Hung (ShengChe)
Hi Chao-Gan,
I have checked the folder.
In the folder of 'Results\fALFF_FunImgARCW\", it has fALFFMAP, mfALFFMap, zfALFFMap of all subjects.
In the folder of 'ResultsS\fALFF_FunImgARCW\", it has sfALFFMAP, smfALFF, szfALFFMap of all subjects.

The folder after fALFF_FunImgARCW is FC_FunImgARCWF, which contains 75,300 files of 1568 ROIs.

Is this problem due to I didn't give predefined ROIs?

Sheng-Che

2016-02-16 19:20 GMT-05:00 The R-fMRI Network <rfmri.org@gmail.com>:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by YAN Chao-Gan (YAN Chao-Gan)
Hi,
Could you check what do you have under "fALFF_FunImgARCWD".
Online version of this post: http://rfmri.org/comment/4167#comment-4167


Many a little makes a mickle -- your kind contributions shall make our efforts not perish from the earth. Please help The R-fMRI Network at http://rfmri.org/#overlay=HelpUs
To manage subscriptions, please visit: http://rnet.co/mailman/listinfo/rfmri.org_rnet.co
Mail comment ID: http://rfmri.org/mailcomment/redirect/%3C31.2220.4167.1457037601.f60bb8cc34d6cb66ed5da6eba0858063%40www.rfmri.org%3E

Hi, 

According to the error message "To RESHAPE the number of elements must not change", could you check the dimension and voxel size of the mask and your functional data?

Best,

Chao-Gan

ShengChe

Mon, 03/07/2016 - 04:40

Permalink

The voxel size of my data is 3.5 x 3.5 x 3.5
I used FWHM as 6 x 6 x 6 and default mask.
Sheng-Che

2016-03-06 0:44 GMT-05:00 The R-fMRI Network <rfmri.org@gmail.com>:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by YAN Chao-Gan (YAN Chao-Gan)

Hi, 

According to the error message "To RESHAPE the number of elements must not change", could you check the dimension and voxel size of the mask and your functional data?

Best,

Chao-Gan


Online version of this post: http://rfmri.org/comment/4171#comment-4171


Many a little makes a mickle -- your kind contributions shall make our efforts not perish from the earth. Please help The R-fMRI Network at http://rfmri.org/#overlay=HelpUs
To manage subscriptions, please visit: http://rnet.co/mailman/listinfo/rfmri.org_rnet.co
Mail comment ID: http://rfmri.org/mailcomment/redirect/%3C31.2220.4171.1457243095.15a61a5e01c337b8c4a313433e605297%40www.rfmri.org%3E

Yes. It works after I used 3 x 3 x 3.
But the problem with functional connectivity still persisted.
Moving Smoothed Files:ReHo_FunImgARCFW OK
Moving Smoothed Files:DegreeCentrality_FunImgARCFW OKMoving Smoothed Files:ALFF_FunImgARCFW OKMoving Smoothed Files:VMHC_FunImgARCFWsymS OKMoving Smoothed Files:fALFF_FunImgARCFW OK
Error using DPARSFA_run>(parfor body) (line 4722)
Home: Undefined variable.

Error in DPARSFA_run (line 4719)
        parfor iMeasure=1:length(MeasureSet)


Error in DPARSFA>pushbuttonRun_Callback (line 1761)
    [Error]=DPARSFA_run(handles.Cfg);


Error in gui_mainfcn (line 95)
        feval(varargin{:});

Error in DPARSFA (line 30)
    gui_mainfcn(gui_State, varargin{:});

 
Error while evaluating UIControl Callback

------
I have checked the folder.
In the folder of 'Results\fALFF_FunImgARCW\", it has fALFFMAP, mfALFFMap, zfALFFMap of all subjects.
In the folder of 'ResultsS\fALFF_FunImgARCW\", it has sfALFFMAP, smfALFF, szfALFFMap of all subjects.

The folder after fALFF_FunImgARCW is FC_FunImgARCWF, which contains 75,300 files of 1568 ROIs.

I have chosen AAL ROIs in template\aal.nii

Sheng-Che

2016-03-07 0:00 GMT-05:00 The R-fMRI Network <rfmri.org@gmail.com>:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by YAN Chao-Gan (YAN Chao-Gan)
I am not sure if resampling the data to 3.5x3.5x3.5 is the cause. You can try to set to the default 3x3x3 in Normalization.
Best,
Online version of this post: http://rfmri.org/comment/4184#comment-4184


Many a little makes a mickle -- your kind contributions shall make our efforts not perish from the earth. Please help The R-fMRI Network at http://rfmri.org/#overlay=HelpUs
To manage subscriptions, please visit: http://rnet.co/mailman/listinfo/rfmri.org_rnet.co
Mail comment ID: http://rfmri.org/mailcomment/redirect/%3C31.2220.4184.1457326803.9a1917279cc7de57ec5012272583a0ed%40www.rfmri.org%3E

"Home: Undefined variable."
What's your path? Do you have space in the path?

Best,

Chao-Gan

On Mon, Mar 7, 2016 at 8:40 PM, The R-fMRI Network <rfmri.org@gmail.com> wrote:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by Sheng-Che Hung (ShengChe)
Yes. It works after I used 3 x 3 x 3.
But the problem with functional connectivity still persisted.
Moving Smoothed Files:ReHo_FunImgARCFW OK
Moving Smoothed Files:DegreeCentrality_FunImgARCFW OKMoving Smoothed Files:ALFF_FunImgARCFW OKMoving Smoothed Files:VMHC_FunImgARCFWsymS OKMoving Smoothed Files:fALFF_FunImgARCFW OK
Error using DPARSFA_run>(parfor body) (line 4722)
Home: Undefined variable.

Error in DPARSFA_run (line 4719)
        parfor iMeasure=1:length(MeasureSet)


Error in DPARSFA>pushbuttonRun_Callback (line 1761)
    [Error]=DPARSFA_run(handles.Cfg);


Error in gui_mainfcn (line 95)
        feval(varargin{:});

Error in DPARSFA (line 30)
    gui_mainfcn(gui_State, varargin{:});

 
Error while evaluating UIControl Callback

------
I have checked the folder.
In the folder of 'Results\fALFF_FunImgARCW\", it has fALFFMAP, mfALFFMap, zfALFFMap of all subjects.
In the folder of 'ResultsS\fALFF_FunImgARCW\", it has sfALFFMAP, smfALFF, szfALFFMap of all subjects.

The folder after fALFF_FunImgARCW is FC_FunImgARCWF, which contains 75,300 files of 1568 ROIs.

I have chosen AAL ROIs in template\aal.nii

Sheng-Che

2016-03-07 0:00 GMT-05:00 The R-fMRI Network <rfmri.org@gmail.com>:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by YAN Chao-Gan (YAN Chao-Gan)
I am not sure if resampling the data to 3.5x3.5x3.5 is the cause. You can try to set to the default 3x3x3 in Normalization.
Best,
Online version of this post: http://rfmri.org/comment/4184#comment-4184


Many a little makes a mickle -- your kind contributions shall make our efforts not perish from the earth. Please help The R-fMRI Network at http://rfmri.org/#overlay=HelpUs
To manage subscriptions, please visit: http://rnet.co/mailman/listinfo/rfmri.org_rnet.co
Mail comment ID: http://rfmri.org/mailcomment/redirect/%3C31.2220.4184.1457326803.9a1917279cc7de57ec5012272583a0ed%40www.rfmri.org%3E


Online version of this post: http://rfmri.org/comment/4185#comment-4185


Many a little makes a mickle -- your kind contributions shall make our efforts not perish from the earth. Please help The R-fMRI Network at http://rfmri.org/#overlay=HelpUs
To manage subscriptions, please visit: http://rnet.co/mailman/listinfo/rfmri.org_rnet.co
Mail comment ID: http://rfmri.org/mailcomment/redirect/%3C31.2220.4185.1457354402.a3f91e8a6582c622685aa04c8c8afe98%40www.rfmri.org%3E



--
Chao-Gan YAN, Ph.D.
Principal Investigator
Institute of Psychology, Chinese Academy of Sciences
16 Lincui Road, Chaoyang District, Beijing 100101, China
-

The path is 
/user/schung/Disconnection/FunRaw
No space in the path

2016-03-07 19:40 GMT-05:00 The R-fMRI Network <rfmri.org@gmail.com>:
[To post a comment, please reply to rfmri.org@gmail.com ABOVE this line]

Commented by Sheng-Che Hung (ShengChe)
Hi Chao-Gan,

Here is my path

Online version of this post: http://rfmri.org/comment/4190#comment-4190


Many a little makes a mickle -- your kind contributions shall make our efforts not perish from the earth. Please help The R-fMRI Network at http://rfmri.org/#overlay=HelpUs
To manage subscriptions, please visit: http://rnet.co/mailman/listinfo/rfmri.org_rnet.co
Mail comment ID: http://rfmri.org/mailcomment/redirect/%3C31.2220.4190.1457397601.8bbd7379b69d6d396edb8e55502cebaf%40www.rfmri.org%3E

Forums
DPABI/DPABISurf/DPARSF